Uses:
It is suitable for blowing the plastic film as high density polyethylene(HDPE),low density polyethylene(LDPE) and linear low density polyethylene(LLDPE),which is widely used for packing foodstuff,garment,textile,daily-use articles and industrial products etc.It can produce pearl film and degradation film via making up a prescription.
Characteristics:
1.The screw stem and cylinder are made of 38CRMOALA high quality alloy steel affer fine finishing and nitrided treatment,which has high hardness,strong resistance to corrosion,durable service.2.The die head is plated with hard chrome,of screw mandrel type structure with even and smooth discharging,the blown plastic film has fine finishing;The blower is of labyrinth structure with even air output.3.The coiling unit adopts pressure rewinding or center rewinging,which is driven by torque motor,with even and easy roll changing.
Main Technical Parameters:
| Model type |
SJ-40*2 |
SJ-45*2 |
| Diameter of Screw Stem |
40mm*2 |
45mm*2 |
| Major Diameter Ratio of Screw Stem |
28:1 |
28:1 |
| Thickness of Products |
0.02-0.20 |
0.02-0.20 |
| Folding Width of Products |
200-600mm |
200-800mm |
| Specification of Die Head |
90mm |
100mm |
| Main Motor Power |
5.5kw*2 |
7.5kw*2 |
| Heating Power |
16kw |
18kw |
| Rational Speed of Screw Stem |
10-120rpm |
10-120rpm |
| Output |
30-45kg/h |
40-60kg/h |
| Machine Weight |
2200kg |
2500kg |
| Overall Dimensions(L*W*H) |
6300*2300*5000mm |
6500*2500*5200mm |
|
|
|
|
|
